Installing an SSL Certificate: Citrix Access Gateway 5.0

Installing the SSL Certificate.

Install SSL Certificate

Open your certificate in a text editor such as Notepad. Your text file should look like this:

-----BEGIN CERTIFICATE-----
[encoded data]
-----END CERTIFICATE-----

Make sure there are 5 dashes either side and there are no extra spaces or characters.

1. In the Access Gateway Management Console, click Certificates.

2. Click Import and then select Server (.pem) to import a CA signed root certificate.

3. In Select file to upload, navigate to the certificate and then click Open.

Install Intermediate CA certificate

1. In the Access Gateway Management Console, click Certificates.

2. On the Certificate Management panel, click Import and then select Trusted (.pem).

3. In Select file to upload, navigate to the certificate and then click Open.

Please Note: When you install an intermediate certificate on Access Gateway, you do not need to specify the

private key or password. After the certificate is installed on the appliance, the certificate needs to be linked to

the server certificate.

Link an Intermediate CA certificate to an SSL server certificate.

1. In the Access Gateway Management Console, click Certificates.

2. In the Certificates table, select the server certificate to which you want to link an intermediate certificate

and then click Add to Chain.

3. In the dialog box that opens, select a certificate and then click Add for each certificate that you want to add

to the chain.

4. When you are finished building the certificate chain, click Close.

Is article helpful?